[ Поиск ] - [ Пользователи ] - [ Календарь ]
Полная Версия: Ошибка в работе скрипта
Эли4ка
Ребята ,а что делать с этой ошибкой,как ее лечить?
Fatal error: Call to undefined function curl_init() in R:\home\test1.ru\www\parser.php on line 12

??



Спустя 27 минут, 14 секунд (22.07.2011 - 05:34) bulgakov написал(а):
Ну пишет что вызов неопределенной функции curl_init() проверь все ли правильно в синтаксисе вокруг этого вызова, может где-то не стоит точка с запятой?

Спустя 5 минут, 29 секунд (22.07.2011 - 05:39) Эли4ка написал(а):
вот код,вроде нет,но у меня стоит версия пхп 5.3 может ииз-за этого?
function curl_get($host, $referer = null, $file = null){
$ch = curl_init($host);
curl_setopt($ch, CURLOPT_USERAGENT, 'koz1024 Image Parser');
curl_setopt($ch, CURLOPT_HEADER, 0);
curl_setopt($ch, CURLOPT_REFERER, $referer);
if (!is_null($file)){
curl_setopt($ch, CURLOPT_FILE, $file);
curl_exec($ch);
curl_close($ch);
}else{
ob_start();
curl_exec($ch);
print(curl_error($ch));
curl_close($ch);
return ob_get_clean();
}
}


Спустя 7 минут, 42 секунды (22.07.2011 - 05:47) bulgakov написал(а):
Я с curl не работал, ммм попробуй вынести $ch = curl_init($host); за пределы функции до ее объявления


$ch = curl_init($host);

function curl_get($referer = null, $file = null, $ch){
curl_setopt($ch, CURLOPT_USERAGENT, 'koz1024 Image Parser');
curl_setopt($ch, CURLOPT_HEADER, 0);
curl_setopt($ch, CURLOPT_REFERER, $referer);
if (!is_null($file)){
curl_setopt($ch, CURLOPT_FILE, $file);
curl_exec($ch);
curl_close($ch);
}else{
ob_start();
curl_exec($ch);
print(curl_error($ch));
curl_close($ch);
return ob_get_clean();
}
}


Попробуй так
Подредактировал

Спустя 51 секунда (22.07.2011 - 05:48) Эли4ка написал(а):
окей..

Спустя 2 минуты, 10 секунд (22.07.2011 - 05:50) Эли4ка написал(а):
посмотрела по справочнику..эта функция исключена из PHP v5.3 из-за этого..извини что напрягла понапрасну..

Спустя 18 часов, 19 минут, 7 секунд (23.07.2011 - 00:09) Winston написал(а):
Цитата (Эли4ка @ 22.07.2011 - 05:07)
Fatal error: Call to undefined function curl_init() in R:\home\test1.ru\www\parser.php on line 12

Выполни phpinfo(); 99.9% что отключена эта либа.

Спустя 6 часов (23.07.2011 - 06:09) Эли4ка написал(а):
PHPprogrammer
нет,все подключено,просто я по справочникам посмотрела,этой функции нет в 5.3.3(это у меня стоит)

Спустя 21 минута, 16 секунд (23.07.2011 - 06:31) Haotarez написал(а):
Эли4ка как это нет? У меня очень даже есть и очень даже работает.

Спустя 40 минут, 45 секунд (23.07.2011 - 07:11) Эли4ка написал(а):
у вас какая версия PHP-это раз,во вторых дайте пример...

Спустя 1 час, 9 минут, 53 секунды (23.07.2011 - 08:21) killer8080 написал(а):
Цитата (Эли4ка @ 23.07.2011 - 06:09)
я по справочникам посмотрела,этой функции нет в 5.3.3

быть такого не может, как же без неё тогда курл будет работать wink.gif
Послушай совет PHPprogrammer-а и загляни в phpinfo(), однозначно у тебя эта библиотека не подключена.

PS в справочнике ничего такого нет.

Спустя 4 минуты, 54 секунды (23.07.2011 - 08:26) ADiel написал(а):
библиотека подключается. На некоторых хостингах по умолчанию отключена. CURL есть всегда =)

Спустя 19 минут, 23 секунды (23.07.2011 - 08:45) Эли4ка написал(а):
смотрела..у меня все подключено..а у Вас какая версия?

Спустя 19 минут, 58 секунд (23.07.2011 - 09:05) ADiel написал(а):

Спустя 8 минут, 47 секунд (23.07.2011 - 09:14) Эли4ка написал(а):
спасибо..

Спустя 29 минут, 46 секунд (23.07.2011 - 09:44) Haotarez написал(а):
Эли4ка
Листинг phpinfo() в студию user posted image

Спустя 6 часов, 40 минут, 40 секунд (23.07.2011 - 16:25) Эли4ка написал(а):
вот пожалуйста
PHP Version 5.3.3


System Windows NT DJ-FCB 5.1 build 2600 (Windows XP Professional Service Pack 3) i586
Build Date Jul 21 2010 20:00:47
Compiler MSVC6 (Visual C++ 6.0)
Architecture x86
Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--disable-isapi" "--enable-debug-pack" "--disable-isapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=D:\php-sdk\oracle\instantclient11\sdk,shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static"
Server API Apache 2.0 Handler
Virtual Directory Support enabled
Configuration File (php.ini) Path C:\WINDOWS
Loaded Configuration File R:\usr\local\php5\php.ini
Scan this dir for additional .ini files (none)
Additional .ini files parsed (none)
PHP API 20090626
PHP Extension 20090626
Zend Extension 220090626
Zend Extension Build API220090626,TS,VC6
PHP Extension Build API20090626,TS,VC6
Debug Build no
Thread Safety enabled
Zend Memory Manager enabled
Zend Multibyte Support disabled
IPv6 Support enabled
Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, phar
Registered Stream Socket Transports tcp, udp
Registered Stream Filters convert.iconv.*, mcrypt.*, mdecrypt.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*

This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.3.0, Copyright © 1998-2010 Zend Technologies

PHP Credits

Configuration

apache2handler

Apache Version Apache/2.2.4 (Win32) mod_ssl/2.2.4 OpenSSL/0.9.8k PHP/5.3.3
Apache API Version 20051115
Server Administrator admin@localhost
Hostname:Port test1.ru:0
Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100
Timeouts Connection: 300 - Keep-Alive: 5
Virtual Server Yes
Server Root R:/usr/local/apache
Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_dir mod_env mod_imagemap mod_include mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_userdir mod_ssl mod_php5

Directive Local Value Master Value
engine 1 1
last_modified 0 0
xbithack 0 0

Apache Environment

Variable Value
HTTP_HOST test1.ru
HTTP_CONNECTION keep-alive
HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/534.1 (KHTML, like Gecko) Chrome/6.0.438.0 Safari/534.1
HTTP_ACCEPT_ENCODING gzip,deflate,sdch
HTTP_ACCEPT_LANGUAGE ru-RU,ru;q=0.8,en-US;q=0.6,en;q=0.4
HTTP_ACCEPT_CHARSET windows-1251,utf-8;q=0.7,*;q=0.3
PATH \usr\local\ImageMagick;\usr\local\php5;C:\Program Files\CodeGear\RAD Studio\6.0\bin;C:\Documents and Settings\All Users\Документы\RAD Studio\6.0\Bpl;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\Autodesk Shared\;C:\Program Files\backburner 2\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\
SystemRoot C:\WINDOWS
COMSPEC C:\WINDOWS\system32\cmd.exe
PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
WINDIR C:\WINDOWS
SERVER_SIGNATURE <address>Apache/2.2.4 (Win32) mod_ssl/2.2.4 OpenSSL/0.9.8k PHP/5.3.3 Server at test1.ru Port 80</address>
SERVER_SOFTWARE Apache/2.2.4 (Win32) mod_ssl/2.2.4 OpenSSL/0.9.8k PHP/5.3.3
SERVER_NAME test1.ru
SERVER_ADDR 127.0.0.1
SERVER_PORT 80
REMOTE_ADDR 127.0.0.1
DOCUMENT_ROOT R:/home/test1.ru/www
SERVER_ADMIN admin@localhost
SCRIPT_FILENAME R:/home/test1.ru/www/info.php
REMOTE_PORT 1196
GATEWAY_INTERFACE CGI/1.1
SERVER_PROTOCOL HTTP/1.1
REQUEST_METHOD GET
QUERY_STRING no value
REQUEST_URI /info.php
SCRIPT_NAME /info.php

HTTP Headers Information

HTTP Request Headers
HTTP Request GET /info.php HTTP/1.1
Host test1.ru
Connection keep-alive
Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/534.1 (KHTML, like Gecko) Chrome/6.0.438.0 Safari/534.1
Accept-Encoding gzip,deflate,sdch
Accept-Language ru-RU,ru;q=0.8,en-US;q=0.6,en;q=0.4
Accept-Charset windows-1251,utf-8;q=0.7,*;q=0.3
HTTP Response Headers
X-Powered-By PHP/5.3.3
Keep-Alive timeout=5, max=100
Connection Keep-Alive
Transfer-Encoding chunked
Content-Type text/html; charset=windows-1251

bcmath

BCMath support enabled

Directive Local Value Master Value
bcmath.scale 0 0

calendar

Calendar support enabled

com_dotnet

COM support enabled
DCOM support disabled
.Net support not present in this build

Directive Local Value Master Value
com.allow_dcom 0 0
com.autoregister_casesensitive 1 1
com.autoregister_typelib 0 0
com.autoregister_verbose 0 0
com.code_page no value no value
com.typelib_file no value no value

Core

PHP Version 5.3.3

Directive Local Value Master Value
allow_call_time_pass_reference On On
allow_url_fopen On On
allow_url_include Off Off
always_populate_raw_post_data Off Off
arg_separator.input & &
arg_separator.output & &
asp_tags Off Off
auto_append_file no value no value
auto_globals_jit On On
auto_prepend_file no value no value
browscap no value no value
default_charset no value no value
default_mimetype text/html text/html
define_syslog_variables Off Off
disable_classes no value no value
disable_functions no value no value
display_errors On On
display_startup_errors Off Off
doc_root no value no value
docref_ext no value no value
docref_root no value no value
enable_dl On On
error_append_string <script language=JavaScript src='/denwer/errors/phperror_js.php'></script> <script language=JavaScript src='/denwer/errors/phperror_js.php'></script>
error_log no value no value
error_prepend_string <!--error--> <!--error-->
error_reporting 30711 30711
exit_on_timeout Off Off
expose_php On On
extension_dir /usr/local/php5/ext /usr/local/php5/ext
file_uploads On On
highlight.bg #FFFFFF #FFFFFF
highlight.comment #FF8000 #FF8000
highlight.default #0000BB #0000BB
highlight.html #000000 #000000
highlight.keyword #007700 #007700
highlight.string #DD0000 #DD0000
html_errors On On
ignore_repeated_errors Off Off
ignore_repeated_source Off Off
ignore_user_abort Off Off
implicit_flush Off Off
include_path .;/usr/local/php5/PEAR .;/usr/local/php5/PEAR
log_errors Off Off
log_errors_max_len 1024 1024
magic_quotes_gpc Off Off
magic_quotes_runtime Off Off
magic_quotes_sybase Off Off
mail.add_x_header Off Off
mail.force_extra_parameters no value no value
mail.log no value no value
max_execution_time 30 30
max_file_uploads 20 20
max_input_nesting_level 64 64
max_input_time 60 60
memory_limit 128M 128M
open_basedir no value no value
output_buffering no value no value
output_handler no value no value
post_max_size 8M 8M
precision 12 12
realpath_cache_size 16K 16K
realpath_cache_ttl 120 120
register_argc_argv On On
register_globals Off Off
register_long_arrays Off Off
report_memleaks On On
report_zend_debug On On
request_order no value no value
safe_mode Off Off
safe_mode_exec_dir no value no value
safe_mode_gid Off Off
safe_mode_include_dir no value no value
sendmail_from me@localhost.com me@localhost.com
sendmail_path \usr\sbin\sendmail -t -i \usr\sbin\sendmail -t -i
serialize_precision 100 100
short_open_tag On On
SMTP localhost localhost
smtp_port 25 25
sql.safe_mode Off Off
track_errors Off Off
unserialize_callback_func no value no value
upload_max_filesize 2M 2M
upload_tmp_dir /tmp /tmp
user_dir no value no value
user_ini.cache_ttl 300 300
user_ini.filename .user.ini .user.ini
variables_order EGPCS EGPCS
xmlrpc_error_number 0 0
xmlrpc_errors Off Off
y2k_compliance On On
zend.enable_gc On On

ctype

ctype functions enabled

date

date/time support enabled
"Olson" Timezone Database Version 2010.9
Timezone Database internal
Default timezone Asia/Tokyo

Directive Local Value Master Value
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.583333 90.583333
date.sunset_zenith 90.583333 90.583333
date.timezone Asia/Tokyo Asia/Tokyo

dom

DOM/XML enabled
DOM/XML API Version 20031129
libxml Version 2.7.7
HTML Support enabled
XPath Support enabled
XPointer Support enabled
Schema Support enabled
RelaxNG Support enabled

ereg

Regex Library Bundled library enabled

filter

Input Validation and Filtering enabled
Revision $Revision: 298196 $

Directive Local Value Master Value
filter.default unsafe_raw unsafe_raw
filter.default_flags no value no value

ftp

FTP support enabled

gd

GD Support enabled
GD Version bundled (2.0.34 compatible)
FreeType Support enabled
FreeType Linkage with freetype
FreeType Version 2.3.9
GIF Read Support enabled
GIF Create Support enabled
JPEG Support enabled
libJPEG Version 6b
PNG Support enabled
libPNG Version 1.2.44
WBMP Support enabled
XBM Support enabled

Directive Local Value Master Value
gd.jpeg_ignore_warning 0 0

hash

hash support enabled
Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5

iconv

iconv support enabled
iconv implementation "libiconv"
iconv library version 1.11

Directive Local Value Master Value
iconv.input_encoding ISO-8859-1 ISO-8859-1
iconv.internal_encoding ISO-8859-1 ISO-8859-1
iconv.output_encoding ISO-8859-1 ISO-8859-1

json

json support enabled
json version 1.2.1

libxml

libXML support active
libXML Compiled Version 2.7.7
libXML Loaded Version 20707
libXML streams enabled

mbstring

Multibyte Support enabled
Multibyte string engine libmbfl
HTTP input encoding translation disabled

mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1.

Multibyte (japanese) regex support enabled
Multibyte regex (oniguruma) version 4.7.1

Directive Local Value Master Value
mbstring.detect_order no value no value
mbstring.encoding_translation Off Off
mbstring.func_overload 0 0
mbstring.http_input pass pass
mbstring.http_output pass pass
mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml)
mbstring.internal_encoding no value no value
mbstring.language neutral neutral
mbstring.strict_detection Off Off
mbstring.substitute_character no value no value

mcrypt

mcrypt support enabled
mcrypt_filter support enabled
Version 2.5.8
Api No 20021217
Supported ciphers cast-128 gost rijndael-128 twofish cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes arcfour
Supported modes cbc cfb ctr ecb ncfb nofb ofb stream

Directive Local Value Master Value
mcrypt.algorithms_dir no value no value
mcrypt.modes_dir no value no value

mhash

MHASH support Enabled
MHASH API Version Emulated Support

mysql

MySQL Support enabled
Active Persistent Links 0
Active Links 0
Client API version mysqlnd 5.0.7-dev - 091210 - $Revision: 300533 $

Directive Local Value Master Value
mysql.allow_local_infile On On
mysql.allow_persistent On On
mysql.connect_timeout 60 60
mysql.default_host no value no value
mysql.default_password no value no value
mysql.default_port no value no value
mysql.default_socket no value no value
mysql.default_user no value no value
mysql.max_links Unlimited Unlimited
mysql.max_persistent Unlimited Unlimited
mysql.trace_mode Off Off

mysqli

MysqlI Support enabled
Client API library version mysqlnd 5.0.7-dev - 091210 - $Revision: 300533 $
Active Persistent Links 0
Inactive Persistent Links 0
Active Links 0

Directive Local Value Master Value
mysqli.allow_local_infile On On
mysqli.allow_persistent On On
mysqli.default_host no value no value
mysqli.default_port 3306 3306
mysqli.default_pw no value no value
mysqli.default_socket no value no value
mysqli.default_user no value no value
mysqli.max_links Unlimited Unlimited
mysqli.max_persistent Unlimited Unlimited
mysqli.reconnect Off Off

mysqlnd

mysqlnd enabled
Version mysqlnd 5.0.7-dev - 091210 - $Revision: 300533 $
Compression supported
SSL not supported
Command buffer size 4096
Read buffer size 32768
Read timeout 31536000
Collecting statistics Yes
Collecting memory statistics No

Client statistics
bytes_sent 0
bytes_received 0
packets_sent 0
packets_received 0
protocol_overhead_in 0
protocol_overhead_out 0
bytes_received_ok_packet 0
bytes_received_eof_packet 0
bytes_received_rset_header_packet 0
bytes_received_rset_field_meta_packet 0
bytes_received_rset_row_packet 0
bytes_received_prepare_response_packet 0
bytes_received_change_user_packet 0
packets_sent_command 0
packets_received_ok 0
packets_received_eof 0
packets_received_rset_header 0
packets_received_rset_field_meta 0
packets_received_rset_row 0
packets_received_prepare_response 0
packets_received_change_user 0
result_set_queries 0
non_result_set_queries 0
no_index_used 0
bad_index_used 0
slow_queries 0
buffered_sets 0
unbuffered_sets 0
ps_buffered_sets 0
ps_unbuffered_sets 0
flushed_normal_sets 0
flushed_ps_sets 0
ps_prepared_never_executed 0
ps_prepared_once_executed 0
rows_fetched_from_server_normal 0
rows_fetched_from_server_ps 0
rows_buffered_from_client_normal 0
rows_buffered_from_client_ps 0
rows_fetched_from_client_normal_buffered 0
rows_fetched_from_client_normal_unbuffered 0
rows_fetched_from_client_ps_buffered 0
rows_fetched_from_client_ps_unbuffered 0
rows_fetched_from_client_ps_cursor 0
rows_affected_normal 0
rows_affected_ps 0
rows_skipped_normal 0
rows_skipped_ps 0
copy_on_write_saved 0
copy_on_write_performed 0
command_buffer_too_small 0
connect_success 0
connect_failure 0
connection_reused 0
reconnect 0
pconnect_success 0
active_connections 0
active_persistent_connections 0
explicit_close 0
implicit_close 0
disconnect_close 0
in_middle_of_command_close 0
explicit_free_result 0
implicit_free_result 0
explicit_stmt_close 0
implicit_stmt_close 0
mem_emalloc_count 0
mem_emalloc_amount 0
mem_ecalloc_count 0
mem_ecalloc_amount 0
mem_erealloc_count 0
mem_erealloc_amount 0
mem_efree_count 0
mem_efree_amount 0
mem_malloc_count 0
mem_malloc_amount 0
mem_calloc_count 0
mem_calloc_amount 0
mem_realloc_count 0
mem_realloc_amount 0
mem_free_count 0
mem_free_amount 0
mem_estrndup_count 0
mem_strndup_count 0
mem_estndup_count 0
mem_strdup_count 0
proto_text_fetched_null 0
proto_text_fetched_bit 0
proto_text_fetched_tinyint 0
proto_text_fetched_short 0
proto_text_fetched_int24 0
proto_text_fetched_int 0
proto_text_fetched_bigint 0
proto_text_fetched_decimal 0
proto_text_fetched_float 0
proto_text_fetched_double 0
proto_text_fetched_date 0
proto_text_fetched_year 0
proto_text_fetched_time 0
proto_text_fetched_datetime 0
proto_text_fetched_timestamp 0
proto_text_fetched_string 0
proto_text_fetched_blob 0
proto_text_fetched_enum 0
proto_text_fetched_set 0
proto_text_fetched_geometry 0
proto_text_fetched_other 0
proto_binary_fetched_null 0
proto_binary_fetched_bit 0
proto_binary_fetched_tinyint 0
proto_binary_fetched_short 0
proto_binary_fetched_int24 0
proto_binary_fetched_int 0
proto_binary_fetched_bigint 0
proto_binary_fetched_decimal 0
proto_binary_fetched_float 0
proto_binary_fetched_double 0
proto_binary_fetched_date 0
proto_binary_fetched_year 0
proto_binary_fetched_time 0
proto_binary_fetched_datetime 0
proto_binary_fetched_timestamp 0
proto_binary_fetched_string 0
proto_binary_fetched_blob 0
proto_binary_fetched_enum 0
proto_binary_fetched_set 0
proto_binary_fetched_geometry 0
proto_binary_fetched_other 0
init_command_executed_count 0
init_command_failed_count 0
com_quit 0
com_init_db 0
com_query 0
com_field_list 0
com_create_db 0
com_drop_db 0
com_refresh 0
com_shutdown 0
com_statistics 0
com_process_info 0
com_connect 0
com_process_kill 0
com_debug 0
com_ping 0
com_time 0
com_delayed_insert 0
com_change_user 0
com_binlog_dump 0
com_table_dump 0
com_connect_out 0
com_register_slave 0
com_stmt_prepare 0
com_stmt_execute 0
com_stmt_send_long_data 0
com_stmt_close 0
com_stmt_reset 0
com_stmt_set_option 0
com_stmt_fetch 0
com_deamon 0

odbc

ODBC Support enabled
Active Persistent Links 0
Active Links 0
ODBC library Win32

Directive Local Value Master Value
odbc.allow_persistent On On
odbc.check_persistent On On
odbc.default_cursortype Static cursor Static cursor
odbc.default_db no value no value
odbc.default_pw no value no value
odbc.default_user no value no value
odbc.defaultbinmode return as is return as is
odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes
odbc.max_links Unlimited Unlimited
odbc.max_persistent Unlimited Unlimited

pcre

PCRE (Perl Compatible Regular Expressions) Support enabled
PCRE Library Version 8.02 2010-03-19

Directive Local Value Master Value
pcre.backtrack_limit 100000 100000
pcre.recursion_limit 100000 100000

PDO

PDO support enabled
PDO drivers mysql

pdo_mysql

PDO Driver for MySQL enabled
Client API version mysqlnd 5.0.7-dev - 091210 - $Revision: 300533 $

Phar

Phar: PHP Archive support enabled
Phar EXT version 2.0.1
Phar API version 1.1.1
SVN revision $Revision: 298908 $
Phar-based phar archives enabled
Tar-based phar archives enabled
ZIP-based phar archives enabled
gzip compression enabled
bzip2 compression disabled (install pecl/bz2)
OpenSSL support disabled (install ext/openssl)

Phar based on pear/PHP_Archive, original concept by Davey Shafik.
Phar fully realized by Gregory Beaver and Marcus Boerger.
Portions of tar implementation Copyright © 2003-2009 Tim Kientzle.

Directive Local Value Master Value
phar.cache_list no value no value
phar.readonly On On
phar.require_hash On On

Reflection

Reflection enabled
Version $Revision: 300393 $

session

Session Support enabled
Registered save handlers files user
Registered serializer handlers php php_binary wddx

Directive Local Value Master Value
session.auto_start Off Off
session.bug_compat_42 On On
session.bug_compat_warn On On
session.cache_expire 180 180
session.cache_limiter nocache nocache
session.cookie_domain no value no value
session.cookie_httponly Off Off
session.cookie_lifetime 0 0
session.cookie_path / /
session.cookie_secure Off Off
session.entropy_file no value no value
session.entropy_length 0 0
session.gc_divisor 100 100
session.gc_maxlifetime 1440 1440
session.gc_probability 1 1
session.hash_bits_per_character 4 4
session.hash_function 0 0
session.name PHPSESSID PHPSESSID
session.referer_check no value no value
session.save_handler files files
session.save_path /tmp /tmp
session.serialize_handler php php
session.use_cookies On On
session.use_only_cookies On On
session.use_trans_sid 0 0

SimpleXML

Simplexml support enabled
Revision $Revision: 299424 $
Schema support enabled

SPL

SPL support enabled
Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException

standard

Dynamic Library Support enabled
Path to sendmail \usr\sbin\sendmail -t -i

Directive Local Value Master Value
assert.active 1 1
assert.bail 0 0
assert.callback no value no value
assert.quiet_eval 0 0
assert.warning 1 1
auto_detect_line_endings 0 0
default_socket_timeout 60 60
safe_mode_allowed_env_vars PHP_ PHP_
safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH
url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset=
user_agent no value no value

tokenizer

Tokenizer Support enabled

wddx

WDDX Support enabled
WDDX Session Serializer enabled

xml

XML Support active
XML Namespace Support active
libxml2 Version 2.7.7

xmlreader

XMLReader enabled

xmlwriter

XMLWriter enabled

zip

Zip enabled
Extension Version $Id: php_zip.c 300470 2010-06-15 18:48:33Z pajoye $
Zip version 1.9.1
Libzip version 0.9.0

zlib

ZLib Support enabled
Stream Wrapper support compress.zlib://
Stream Filter support zlib.inflate, zlib.deflate
Compiled Version 1.2.3
Linked Version 1.2.3

Directive Local Value Master Value
zlib.output_compression Off Off
zlib.output_compression_level -1 -1
zlib.output_handler no value no value

Additional Modules

Module Name

Environment

Variable Value
no value ::=::\
no value R:=R:\usr\local\apache
ALLUSERSPROFILE C:\Documents and Settings\All Users
APPDATA C:\Documents and Settings\DJ T\Application Data
CG_BOOST_ROOT C:\Program Files\CodeGear\RAD Studio\6.0\include\boost_1_35
CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip
CLIENTNAME Console
CommonProgramFiles C:\Program Files\Common Files
COMPUTERNAME DJ-FCB
ComSpec C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK NO
HOMEDRIVE C:
HOMEPATH \Documents and Settings\DJ T
LOGONSERVER \\DJ-FCB
NUMBER_OF_PROCESSORS 2
OS Windows_NT
Path \usr\local\ImageMagick;\usr\local\php5;C:\Program Files\CodeGear\RAD Studio\6.0\bin;C:\Documents and Settings\All Users\Документы\RAD Studio\6.0\Bpl;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\Autodesk Shared\;C:\Program Files\backburner 2\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\
PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PHPRC \usr\local\php5
PROCESSOR_ARCHITECTURE x86
PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL 6
PROCESSOR_REVISION 0f0b
ProgramFiles C:\Program Files
PROMPT $P$G
QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip
SESSIONNAME Console
SystemDrive C:
SystemRoot C:\WINDOWS
TEMP C:\DOCUME~1\DJT~1\LOCALS~1\Temp
TMP C:\DOCUME~1\DJT~1\LOCALS~1\Temp
USERDOMAIN DJ-FCB
USERNAME DJ T
USERPROFILE C:\Documents and Settings\DJ T
VS90COMNTOOLS C:\Program Files\Microsoft Visual Studio 9.0\Common7\Tools\
windir C:\WINDOWS
AP_PARENT_PID 3456

PHP Variables

Variable Value
_SERVER["HTTP_HOST"] test1.ru
_SERVER["HTTP_CONNECTION"] keep-alive
_SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
_SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/534.1 (KHTML, like Gecko) Chrome/6.0.438.0 Safari/534.1
_SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch
_SERVER["HTTP_ACCEPT_LANGUAGE"] ru-RU,ru;q=0.8,en-US;q=0.6,en;q=0.4
_SERVER["HTTP_ACCEPT_CHARSET"] windows-1251,utf-8;q=0.7,*;q=0.3
_SERVER["PATH"] \usr\local\ImageMagick;\usr\local\php5;C:\Program Files\CodeGear\RAD Studio\6.0\bin;C:\Documents and Settings\All Users\Документы\RAD Studio\6.0\Bpl;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\Autodesk Shared\;C:\Program Files\backburner 2\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\
_SERVER["SystemRoot"] C:\WINDOWS
_SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe
_SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
_SERVER["WINDIR"] C:\WINDOWS
_SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.4 (Win32) mod_ssl/2.2.4 OpenSSL/0.9.8k PHP/5.3.3 Server at test1.ru Port 80</address>
_SERVER["SERVER_SOFTWARE"] Apache/2.2.4 (Win32) mod_ssl/2.2.4 OpenSSL/0.9.8k PHP/5.3.3
_SERVER["SERVER_NAME"] test1.ru
_SERVER["SERVER_ADDR"] 127.0.0.1
_SERVER["SERVER_PORT"] 80
_SERVER["REMOTE_ADDR"] 127.0.0.1
_SERVER["DOCUMENT_ROOT"] R:/home/test1.ru/www
_SERVER["SERVER_ADMIN"] admin@localhost
_SERVER["SCRIPT_FILENAME"] R:/home/test1.ru/www/info.php
_SERVER["REMOTE_PORT"] 1196
_SERVER["GATEWAY_INTERFACE"] CGI/1.1
_SERVER["SERVER_PROTOCOL"] HTTP/1.1
_SERVER["REQUEST_METHOD"] GET
_SERVER["QUERY_STRING"] no value
_SERVER["REQUEST_URI"] /info.php
_SERVER["SCRIPT_NAME"] /info.php
_SERVER["PHP_SELF"] /info.php
_SERVER["REQUEST_TIME"] 1311427430
_SERVER["argv"]
Array
(
)
_SERVER["argc"] 0
_ENV["ALLUSERSPROFILE"] C:\Documents and Settings\All Users
_ENV["APPDATA"] C:\Documents and Settings\DJ T\Application Data
_ENV["CG_BOOST_ROOT"] C:\Program Files\CodeGear\RAD Studio\6.0\include\boost_1_35
_ENV["CLASSPATH"] .;C:\Program Files\QuickTime\QTSystem\QTJava.zip
_ENV["CLIENTNAME"] Console
_ENV["CommonProgramFiles"] C:\Program Files\Common Files
_ENV["COMPUTERNAME"] DJ-FCB
_ENV["ComSpec"] C:\WINDOWS\system32\cmd.exe
_ENV["FP_NO_HOST_CHECK"] NO
_ENV["HOMEDRIVE"] C:
_ENV["HOMEPATH"] \Documents and Settings\DJ T
_ENV["LOGONSERVER"] \\DJ-FCB
_ENV["NUMBER_OF_PROCESSORS"] 2
_ENV["OS"] Windows_NT
_ENV["Path"] \usr\local\ImageMagick;\usr\local\php5;C:\Program Files\CodeGear\RAD Studio\6.0\bin;C:\Documents and Settings\All Users\Документы\RAD Studio\6.0\Bpl;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\Autodesk Shared\;C:\Program Files\backburner 2\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\
_ENV["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
_ENV["PHPRC"] \usr\local\php5
_ENV["PROCESSOR_ARCHITECTURE"] x86
_ENV["PROCESSOR_IDENTIFIER"] x86 Family 6 Model 15 Stepping 11, GenuineIntel
_ENV["PROCESSOR_LEVEL"] 6
_ENV["PROCESSOR_REVISION"] 0f0b
_ENV["ProgramFiles"] C:\Program Files
_ENV["PROMPT"] $P$G
_ENV["QTJAVA"] C:\Program Files\QuickTime\QTSystem\QTJava.zip
_ENV["SESSIONNAME"] Console
_ENV["SystemDrive"] C:
_ENV["SystemRoot"] C:\WINDOWS
_ENV["TEMP"] C:\DOCUME~1\DJT~1\LOCALS~1\Temp
_ENV["TMP"] C:\DOCUME~1\DJT~1\LOCALS~1\Temp
_ENV["USERDOMAIN"] DJ-FCB
_ENV["USERNAME"] DJ T
_ENV["USERPROFILE"] C:\Documents and Settings\
_ENV["VS90COMNTOOLS"] C:\Program Files\Microsoft Visual Studio 9.0\Common7\Tools\
_ENV["windir"] C:\WINDOWS
_ENV["AP_PARENT_PID"] 3456



Спустя 13 минут, 21 секунда (23.07.2011 - 16:38) Haotarez написал(а):
Ну, а curl то не подключен : )

Спустя 11 минут, 27 секунд (23.07.2011 - 16:49) Эли4ка написал(а):
да,теперь вижу..хорошо а где его для денвера скачать?денвер 3 если что..

Спустя 42 минуты, 53 секунды (23.07.2011 - 17:32) Haotarez написал(а):
Эли4ка
если мне память не изменяет он поставляется с ним но по дефолту выключен. Раскомментируйте(удалите точку с запятой) в php.ini строчку ;extension=php_curl.dll и перезапустите денвер после этой нехитрой манипуляции.

Спустя 3 часа, 42 минуты, 3 секунды (23.07.2011 - 21:14) killer8080 написал(а):
Тю так речь идёт о Денвере
Цитата (Haotarez @ 23.07.2011 - 17:32)
если мне память не изменяет он поставляется с ним но по дефолту выключен.

Нет в Денвере курла нет, покрайней мере в той версии что стоит у меня.
Эли4ка
скачай архив, оттуда достань php_curl.dll и положи в папку x:\WebServers\usr\local\php5\ext\, а в php.ini разкомментируй соответсвующую строчку.
Цитата
extension=php_curl.dll
И будет тебе счастье rolleyes.gif

Спустя 7 часов, 53 минуты, 2 секунды (24.07.2011 - 05:07) Эли4ка написал(а):
спасибо..

Спустя 8 минут, 36 секунд (24.07.2011 - 05:16) Эли4ка написал(а):
а можно узнать,для чего нужны другие расширения..и там их столько?

Спустя 23 минуты, 7 секунд (24.07.2011 - 05:39) Эли4ка написал(а):
и у меня после установки как вы сказали,теперь после запуска денвера пишет что не найдена либа php5.dll и cURL по прежнему не пашет..что это может быть?

Спустя 2 минуты, 31 секунда (24.07.2011 - 05:42) Haotarez написал(а):
значит где-то ошиблись в php.ini, приаттачте - посмотрим

Спустя 8 минут, 19 секунд (24.07.2011 - 05:50) Эли4ка написал(а):
вот файл пожалуйста..
[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.


;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off

; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
;
NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
;
be sure not to use short tags.
short_open_tag = On

; Allow ASP-style <% %> tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision = 12

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of '
On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off

; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set '
On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are '
off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'

; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
;
A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You'
re encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On

;
;
Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
;
then turn on safe_mode_gid.
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (
directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =

;
When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

;
Setting certain environment variables may be a potential security breach.
;
This directive contains a comma-delimited list of prefixes. In Safe Mode,
;
the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
;
Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =

; Colors for Syntax Highlighting mode. Anything that'
s acceptable in
; <span style="color: ???????"> would work.
;
highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long request, which may end up
; being interrupted by the user or a browser timing out.
;
ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
;
realpath_cache_size=16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
;
realpath_cache_ttl=120

;
;
Misc
;
;
Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On


;;;;;;;;;;;;;;;;;;;
;
Resource Limits ;
;;;;;;;;;;;;;;;;;;;


max_execution_time = 30 ; Maximum execution time of each script, in seconds
max_input_time
= 60 ; Maximum amount of time each script may spend parsing request data
;max_input_nesting_level = 64 ; Maximum input variable nesting level
memory_limit
= 128M ; Maximum amount of memory a script may consume (128MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;
error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it'
s possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP'
s initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
;
; Examples:
;
; - Show all errors, except for notices and coding standards warnings
;
;error_reporting = E_ALL & ~E_NOTICE
;
; - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
;
; - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
;
; - Show all errors except for notices and coding standards warnings
;
error_reporting = E_ALL & ~E_NOTICE

; Print out errors (as a part of the output). For production web sites,
; you'
re strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
;
;
possible values for display_errors:
;
;
Off - Do not display any errors
; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
;
;
display_errors = "stderr"
;
;
stdout (On) - Display errors to STDOUT
;
display_errors = On

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It'
s strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or error_log (below))
;
As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On

;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Turn off normal error reporting and emit XML-RPC error XML
;xmlrpc_errors = 0
; An XML-RPC faultCode
;xmlrpc_error_number = 0

; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '
/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html

; String to output before an error message.
error_prepend_string = "<!--error-->"

; String to output after an error message.
error_append_string = "<script language=JavaScript src='
/denwer/errors/phperror_js.php'></script>"

; Log errors to specified file.
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don'
t want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off

; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you'
re not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays=Off

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don'
t use these variables, you
; should turn it off for increased performance.
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
post_max_size = 8M

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc=Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape '
with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP'
s built-in default is text/html
default_mimetype
= "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;
always_populate_raw_post_data = On


;;;;;;;;;;;;;;;;;;;;;;;;;
;
Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

;
UNIX: "/path1:/path2"
include_path = ".;/usr/local/php5/PEAR"
;
;
Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
;
if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
;
see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root
=

;
The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =

;
Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/local/php5/ext"

; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
;
cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
;
cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
;
cgi.redirect_status_env = ;

;
cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix it'
s paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is zero. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
;
cgi.fix_pathinfo=0

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
;
Set to 1 if running under IIS. Default is zero.
;
fastcgi.impersonate = 1;

;
Disable logging through FastCGI connection
; fastcgi.log = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0


;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
upload_tmp_dir = /tmp

; Maximum allowed size for uploaded files.
upload_max_filesize = 2M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
allow_url_include = Off

; Define the anonymous ftp password (your email address)
;from="john@doe.com"

; Define the User-Agent string
; user_agent="PHP"

; Default timeout for socket based streams (seconds)
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; ... or under UNIX:
;
; extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.


; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.

;extension=php_bz2.dll
extension=php_curl.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_exif.dll
;extension=php_fdf.dll
extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_ifx.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
;extension=php_msql.dll
;extension=php_mssql.dll
extension=php_mysql.dll
extension=php_mysqli.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_pdo.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_oci8.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
;extension=php_pgsql.dll
;extension=php_pspell.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_soap.dll
;extension=php_sockets.dll
;extension=php_sqlite.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_zip.dll

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
date.timezone = Asia/Tokyo

;date.default_latitude = 31.7667
;date.default_longitude = 35.2333

;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333

[filter]
;filter.default = unsafe_raw
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[sqlite]
;sqlite.assoc_case = 0

[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off

[mail function]
;;
;; Комментарий Денвера:
;; чтобы отключить отладочный эмулятор sendmail, указите в директиве SMTP
;; адрес SMTP-сервера вашего провайдера, а также НЕ ЗАБУДЬТЕ закомментировать
;; директиву sendmail_path ниже! Если sendmail_path не закомментировать,
;; работать не будет, т.к. sendmail_path имеет приоритет.
;;

; For Win32 only.
;SMTP = localhost
;smtp_port = 25

; For Win32 only.
sendmail_from = Tomas@localhost.com

; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
sendmail_path = \usr\sbin\sendmail -t -i

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn'
t apply in safe mode).
mysql.default_host =

;
Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn'
t apply in safe mode).
;
Note that this is generally a *bad* idea to store passwords in this file.
; *
Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off

[MySQLi]

; Maximum number of links. -1 means no limit.
mysqli.max_links = -1

; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =

; Default host for mysql_connect() (doesn'
t apply in safe mode).
mysqli.default_host =

;
Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =

; Default password for mysqli_connect() (doesn'
t apply in safe mode).
;
Note that this is generally a *bad* idea to store passwords in this file.
; *
Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1

[OCI8]
; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
;oci8.ping_interval = 60

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
;oci8.default_prefetch = 10

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn'
t apply in safe mode).
ifx.default_host =

;
Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn'
t apply in safe mode).
ifx.default_password =

;
Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL'
s are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
;
Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
; session.save_path = "N;/path"
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process'
s umask.
session.save_path = "/tmp"

; Whether to use cookies.
session.use_cookies = 1

;session.cookie_secure =

;
This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
;
session.use_only_cookies = 1

; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

;
The domain for which the cookie is valid.
session.cookie_domain =

;
Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
session.cookie_httponly =

;
Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php

; Define the probability that the 'garbage collection' process is started
; on every session initialization.
;
The probability is calculated by using gc_probability/gc_divisor,
;
e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.

session.gc_probability = 1
session.gc_divisor = 100

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
;
happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
;
For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
;
cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
;
You can disable the feature and the warning separately. At this time,
;
the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 = 1
session.bug_compat_warn = 1

; Check HTTP Referer to invalidate externally stored URLs containing ids.
;
HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

;
How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;
session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; trans sid support is disabled by default.
;
Use of trans sid may risk your users security.
;
Use this option with caution.
; -
User may send URL contains active session ID
; to other person via. email/irc/etc.
; -
URL that contains active session ID may be stored
; in publically accessible computer.
; -
User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0

; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
;
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 4

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 2147483647

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 2147483647

; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don'
t bail out by default.
;
assert.bail = Off

; User-function to be called if an assertion fails.
;
assert.callback = 0

; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;
assert.quiet_eval = 0

[COM]
;
path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
;
allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;
com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
;com.autoregister_verbose = true

[mbstring]
;
language for internal character representation.
;
mbstring.language = Japanese

; internal/script encoding.
;
Some encoding cannot work as internal encoding.
; (
e.g. SJIS, BIG5, ISO-2022-*)
;
mbstring.internal_encoding = EUC-JP

; http input encoding.
;
mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
;
Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;
mbstring.encoding_translation = Off

; automatic encoding detection order.
;
auto means
;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;

;
overload(replace) single byte functions by mbstring functions.
;
mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
;
etc. Possible values are 0,1,2,4 or combination of them.
;
For example, 7 for overload everything.
;
0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0

[FrontBase]
;
fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.show_timestamp_decimals = Off
;fbsql.default_database =
;
fbsql.default_database_password =
;
fbsql.default_host =
;
fbsql.default_password =
;
fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128

[gd]
;
Tell the jpeg decode to libjpeg warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
;gd.jpeg_ignore_warning = 0

[exif]
;
Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
;
With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;
exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;
exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS

[Tidy]
;
The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?
;
WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy
.clean_output = Off

[soap]
;
Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400

; Local Variables:
;
tab-width: 4
; End:



Спустя 10 минут, 34 секунды (24.07.2011 - 06:01) Haotarez написал(а):
проверьте наличие директории extension_dir = "/usr/local/php5/ext" и наличия в ней php_curl.dll

Спустя 7 минут, 25 секунд (24.07.2011 - 06:08) Эли4ка написал(а):
Haotarez
директория есть,я туда dll_cURL.dll и клала..

Спустя 20 минут, 9 секунд (24.07.2011 - 06:28) Haotarez написал(а):
Эли4ка
а нужен php_curl.dll при чем в том-же регистре как и написано в php.ini
Вообще мистическая ситуация если честно (smile) может лесом этот денвер и поставить wamp ?

Спустя 2 часа, 51 минута, 17 секунд (24.07.2011 - 09:19) killer8080 написал(а):
Цитата (Эли4ка @ 24.07.2011 - 05:39)
и у меня после установки как вы сказали,теперь после запуска денвера пишет что не найдена либа php5.dll и cURL по прежнему не пашет..что это может быть?

php5.dll лежит в том же архиве, в самом корне smile.gif
Положи его в x:\WebServers\usr\local\php5\

Спустя 1 час, 41 минута, 31 секунда (24.07.2011 - 11:01) ADiel написал(а):
лучше утопить денвер и поставить Xampp или WAMP

Спустя 3 минуты, 5 секунд (24.07.2011 - 11:04) Haotarez написал(а):
ADiel
вы опоздали, я уже об этом писать чуть раньше : )

Спустя 46 минут, 21 секунда (24.07.2011 - 11:50) Эли4ка написал(а):
а дайте ссылку где его скачать..но желательно так,чтобы рядышком были все компоненты,а то собирать его по всему интернету скучно..

Спустя 5 минут, 57 секунд (24.07.2011 - 11:56) killer8080 написал(а):
Эли4ка
а что с денвером не получилось? unsure.gif

Спустя 15 минут, 21 секунда (24.07.2011 - 12:12) Эли4ка написал(а):
killer8080
в топике самый первый пост..из-за этого вся чехорда..

Спустя 9 минут, 14 секунд (24.07.2011 - 12:21) killer8080 написал(а):
Эли4ка
а мой совет не помог?
Свернутый текст
Цитата (killer8080 @ 24.07.2011 - 09:19)
Цитата (Эли4ка @ 24.07.2011 - 05:39)
и у меня после установки как вы сказали,теперь после запуска денвера пишет что не найдена либа php5.dll и cURL по прежнему не пашет..что это может быть?

php5.dll лежит в том же архиве, в самом корне smile.gif
Положи его в x:\WebServers\usr\local\php5\


Спустя 1 час, 10 минут, 49 секунд (24.07.2011 - 13:32) Эли4ка написал(а):
killer8080
к сожалению нет..да я наверно снесу денвер а поставлю апач.

Спустя 39 минут, 20 секунд (24.07.2011 - 14:11) ADiel написал(а):
http://www.apachefriends.org/en/xampp.html
http://www.wampserver.com/en/

xampp русский лучше не ставить, там версия древняя. Самая актуальная - eng

Цитата
да я наверно снесу денвер а поставлю апач.

Денвер состоит из апача, php, mysql
Тогда уже ставить эту связку, а не голый апач

Спустя 7 минут, 21 секунда (24.07.2011 - 14:18) Эли4ка написал(а):
спасибо.

Спустя 4 минуты, 21 секунда (24.07.2011 - 14:23) killer8080 написал(а):
Цитата (Эли4ка @ 24.07.2011 - 13:32)
к сожалению нет..

а какие ошибки выдаёт?

Спустя 1 минута, 36 секунд (24.07.2011 - 14:24) killer8080 написал(а):
Цитата (ADiel @ 24.07.2011 - 14:11)
Денвер состоит из апача, php, mysql

там ещё есть perl и phpmyadmin smile.gif

Спустя 10 минут, 34 секунды (24.07.2011 - 14:35) ADiel написал(а):
Цитата (killer8080 @ 24.07.2011 - 11:24)
Цитата (ADiel @ 24.07.2011 - 14:11)
Денвер состоит из апача, php, mysql

там ещё есть perl и phpmyadmin smile.gif

Да.. и в phpmyadmin есть index.php, ...... (сотни файлов) ..., Я назвал только три софтины, действительно обязательные для установки.
Phpmyadmin это вообще скрипт на PHP =)

Спустя 56 минут, 7 секунд (24.07.2011 - 15:31) Эли4ка написал(а):
ошибку выдает ту же,что и в начале топика..но спасибо за помощь..

Спустя 9 минут, 32 секунды (24.07.2011 - 15:41) killer8080 написал(а):
Эли4ка
и в phpinfo() cURL так и не появился? Странно blink.gif может dll-ки не той версии.

Спустя 9 минут, 57 секунд (24.07.2011 - 15:50) bulgakov написал(а):
а в php.ini curl подключен?

Спустя 1 час, 10 минут, 37 секунд (24.07.2011 - 17:01) Эли4ка написал(а):
да подключен..

Спустя 15 минут, 27 секунд (24.07.2011 - 17:17) ADiel написал(а):
МНе кажется, что путь к php в path остался старый, потому и проблема.

Спустя 17 часов, 56 минут, 7 секунд (25.07.2011 - 11:13) Эли4ка написал(а):
я путь к папке с расширениями верно прописала..и расширение такими же буквами прописала..вообщем ставлю апач..но спасибо тебе за помощь.

Спустя 6 минут, 37 секунд (25.07.2011 - 11:19) ADiel написал(а):
Я не о том. В винде есть такая строка PATH, в ней прописаны C:\WINDOWS, C:\WINDOWS\SYSTEM32 и путь к PHP там же

Спустя 2 часа, 45 минут, 55 секунд (25.07.2011 - 14:05) Эли4ка написал(а):
о я об этом не знала..сейчас посмотрю..
Быстрый ответ:

 Графические смайлики |  Показывать подпись
Здесь расположена полная версия этой страницы.
Invision Power Board © 2001-2025 Invision Power Services, Inc.